|
The Robot Power Scorpion Nano is a super small low-cost
high-performance dual channel H-bridge speed controller for small robots,
and other electrical loads. It is designed for ant and beetle weight
combat robots and other small robots such as firefighting robots, maze
solvers, micro sumo and carpet rovers. The Scorpion Nano is also suitable
for low-power pneumatic valves, solenoids and relays.
The Scorpion Nano is designed to pack the highest power
handling capability, flexibility of control and usability options into
one of the smallest dual motor controls available.
Features
- Size: 0.75" x
0.60" x .15"
- Weight: 6.0 grams
- Standard R/C pulse format
- 3.3V to 16V battery
voltage
- 1.2A continuous (2A peak)
current on each channel.
- Fully reversible H-bridge
design. Equal power handling in both directions on both channels.
- Full current limiting and
over temp limiting. Motors and batteries are protected from dead
short conditions.
- Two channels may be
either mixed (throttle/steering) or separately controlled. Ideal for
skid steer vehicles/robots.
- Status LED status
information and mode indications
- Receiver battery
eliminator circuit (BEC) standard - may be disabled. This can
provide up to 100 mA of current at 3.3V to
the RC receiver and other attached electronic circuits.
- Failsafe shuts off motors
if R/C signal is lost
- Calibrate function to
match unit to radio signal range. Settings retained in EEPROM
non-volatile storage.
- Mix Jumper can be cut to
enable separate control of each channel
- Comes with pre-soldered
RC and battery/motor wires for easy assembly into your robot
|
